Ribo sees ROI in under 5 months after update, drives Trumpf punches and lasers with JETCAM up to 70% faster than benchmarked systems
Ribo has been using JETCAM to drive a series of Trumpf punch and laser machines since 2001, after finding it to be up to 70% faster than competing systems. A recent update saw a return on investment in under five months.
Weldall sees ROI of just six months with low cost nesting software
Weldall (Cannock) Ltd, based in Staffordshire, UK, provide architectural fabrication services. The company decided to replace their ageing Haco punch press with a new Yawei Nisshinbo HPE punch press - the first of its kind in the UK. Their Haco was being driven by a CAM system which was cumbersome to use and had no automation features such as tool teach or nesting. After selecting JETCAM Expert they saw a return on investment in just six months due to features such as tool teach and bump nesting.
JETCAM launches low-cost subscription for composite material location/life tracking software
JETCAM today announced at JEC World, Paris, the launch of CrossTrack MTL, its composite material and kit location/life tracking software. The software is available on a monthly subscription basis and companies can also receive an initial free three-month trial without commitment. CrossTrack MTL allows composite manufacturers to recreate all of their material locations virtually, so that any composite material location and life can be tracked. Allocating material to locations such as freezers and autoclaves will alter or stop the life countdown, with every change to a material status being logged. Traceability reports for individual rolls or tapes, batches of material or kits can be generated in seconds.
JETCAM showcases new versions of CrossTrack and latest Expert CAM/Nesting software at JEC World 2017
JETCAM will exhibit version 4 of its CrossTrack Composite Manufacturing suite, including the new Material Tracking Lite (MTL) product aimed at customers who want low-cost material life tracking of rolls and kits at JEC World, Paris between 14th and 16th March 2017.
JETCAM showcases new Expert nesting, ‘JET-Cut’, plus all-new Line Management and Scheduling software
JETCAM will be showcasing for its flagship nesting software, previewing new features, as well as demonstrating its new line management and scheduling software at Euroblech – Hall 14, stand L29 between 25th – 29th October in Hannover, Germany.
V19.08 of JETCAM Expert released, with new Right Angle Shear Logic, special tool enhancements, and more.
JETCAM today announced the launch of version 19.08 of its award-winning Expert CADCAM and nesting software, featuring several major new features, interface enhancements across the software along with several new and updated postprocessors.
Hillphoenix sees 8 month ROI running JETCAM with seamless integration with Aquila DMM
After implementing JETCAM to support both punching and laser machines across two facilities Hillphoenix saw a return on investment in just 8 month, along with tight integration into Aquila DMM.
V19 of JETCAM Expert released, with simultaneous launch of online video training
JETCAM today announced the launch of version 19 of its award-winning Expert CADCAM and nesting software, featuring several major new features and hundreds of improvements across the software. JETCAM has also launched an online video training centre, dubbed ‘JETCAM University’, which is available free of charge to all customers.
JETCAM and OptiSolutions announce technology partnership
JETCAM International s.a.r.l. and OPTISOLUTIONS LLC have announced a technology partnership whereby JETCAM will provide core elements of its Expert nesting system to be used within OPTISOLUTIONS new PDQ Nest product.
JETCAM exhibits all-new CrossTrack and Expert nesting software at JEC World 2016.
JETCAM will exhibit new versions of its CrossTrack Composite Manufacturing suite, including a new "MLM Lite" level aimed at customers who want low-cost material life tracking of rolls and kits at booth 5A N78, JEC World between 8th and 10th March 2016.
JETCAM celebrates 30th Anniversary
JETCAM today announced that 2016 sees the company celebrate its 30th anniversary. Since 1986 the company has grown to be a dominant force in the CADCAM and nesting market for sheet metal and composite manufacturing through its award-winning JETCAM Expert range, with over 9000 licenses spanning 82 countries.
JETCAM Orders Controller helps Production Controllers go paperless
The latest release of JETCAM Orders Controller (JOC) includes a powerful new document linking feature, aimed at reducing the shop floor paper trail and providing a single location for accessing relevant documents. Staff can drag and drop any type and quantity of files onto a component or assembly that will be subsequently nested, making it very easy to locate associated documents such as CAD drawings, orders, quality or works documents.
JETCAM releases new Order Controller software with multi-profile CAD filtering and DXF splitting
JETCAM International s.a.r.l. has released version 1.65 of JETCAM Orders Controller (JOC) Premium and Premium Automation with two major new CAD import features, aimed at streamlining the CAD file to NC code generation process.
JETCAM rolls out new software at Fabtech
JETCAM International s.a.r.l. will use the Fabtech International show in Chicago to roll out new versions of its core sheet metal software products, at booth no S2279 between November 9th and 12th 2015.
Kent Franklin joins JETCAM
JETCAM International s.a.r.l. today announced that Kent Franklin has joined the company to support its US dealers and customers as a JETCAM Technical Support Engineer.
Kent has accumulated 21 years of experience using and support JETCAM Expert, across a wide range of punching and profiling equipment. His role is focussed on providing assistance to JETCAM's dealer and customer base in the Americas and Canada, along with working with the JETCAM technical team on assisting with postprocessor development and testing of new product functionality.
Said Kent; 'As a longstanding JETCAM user for many years it's great to be on the other side of the fence, share my knowledge and help others. It's very exciting to see what’s coming in the development process and get to learn and test it ahead of general releases.'
Added Martin Bailey, General Manager; 'Kent has been able to hit the ground running because of his extensive experience, and we believe that he'll help us further grow our reach and support into the North/South American and Canadian markets.'
Kent is employed by JETCAM’s US entity JETCAM USA Inc, and is based in Wisconsin.